Portable UCI Hardness Tester

Portable UCI Hardness Tester 


alphaDUR -II

 
Standard Features:
  • Fast and easy hardness testing
  • Measuring method according to DIN 50159 and ASTM A1038
  • Conversion according to EN ISO 18265 and ASTM E140
  • Robust metal casing
  • Large colour LCD display
  • Luilt-in Lithium-Ion battery
  • Extensive storage and statistical functions
  • USB-C interface for data transfer to PC and USB flash drive

The alphaDUR mini II is the fourth generation of the alphaDUR series, which has been successful for many years.

The operation of the alphaDUR II mini is very easy because all information is shown on the large LCD display. Hardness scale and material can quickly be changed by special keys. Measurements can be done fast and accurate. The measured value is displayed directly after the test load has been applied. A test load between 0.3 and 10 kg can be chosen depending on the application and the sample surface.

Technical Data:

Measuring range:  10 – approx. 3000 HV, according to EN ISO 18265 and ASTM E140 Hardness scales: Vickers (HV), Brinell (HB), Rockwell (HRC, HRB, HRA, HRD, HRE, HRF), Super Rockwell (HR45N), Knoop (HK), tensile strength (N/mm²) 

Test load: 3, 10, 20, 30, 49 or 98 N, depending on the UCI probe

Uncertainty of measurement: < 2%

Display: 3.5“-TFT-LCD colour display, 640 x 480 pixel

Memory: 2 GB RAM, 8 GB eMMC-Flash-Memory (> 1.000.000 measurements)

Interfaces: USB-C (charging and data transfer), CAN bus for probe connection, Bluetooth 5.0 BLE

Data transfer: Direct protocol printout with mini thermal printer Data transfer to USB flash drive &PC

Battery: Built-in Lithium-Ion battery, 6800 mAh, approx. 10 h Operating time Dimensions:154 x 84 x 23 mm (H x W x D), 430 g

 

Portable UCI Hardness Tester alphaDUR

Incoming goods inspection. Hardness testing of metals in production. Testing of machine parts, weld seams, coatings and hardened parts even at difficult to access locations and at any angle.

  • Fast and easy hardness testing
  • Measuring method according to DIN 50159 and ASTM A1038
  • Robust metal casing
  • Large colour display
  • Built-in Li-ion battery
  • Extensive storage and statistical functions
  • USB interface and PC software

Technical Data:

Measuring method

UCI (Ultrasonic Contact Impedance) according to DIN 50159 and ASTM A 1038-05

  

Test load

3, 10, 20, 30, 49 or 98 N, depending on the UCI probe (HV0.3 – HV10)

  

Testing Materials:

Preferably metals, material calibrations can be saved in the device. Measurements on glass, ceramic and plastic are possible if comparison measurements for calibration are done. Minimum thickness for steel app. 5mm (depending on the sample geometry)

  

Measuring range

10 – approx. 3000 HV, according to EN ISO 18265 and ASTM E140

  

Hardness scales

Vickers (HV), Brinell (HB), Rockwell (HRC, HRB, HRA, HRD, HRE, HRF), Super Rockwell (HR45N), Knoop (HK), tensile strength (N/mm²)

  

Uncertainty of measurement

< 2%

  

Display

3.5“-TFT-LCD colour display, 640 x 480 pixel

  

Memory

2 GB RAM, 8 GB eMMC-Flash-Memory (> 1.000.000 measurements)

  

Interfaces

USB-C (charging and data transfer),

 

CAN bus for probe connection,

 

Bluetooth 5.0 BLE

  

Data transfer

Direct protocol printout with mini thermal printer

 

Data transfer to USB flash drive and PC

  

Temperature range

Operation: 0°C to 50°C, storage: -20°C to 60°C

  

Battery

Built-in Lithium-Ion battery, 6800 mAh, approx. 10 h operating time

  

Dimensions

Device: 154 x 84 x 23 mm (HxWxD), 430 g

 

Probe: Ø 19,5 mm, length 175 mm, 190 g

 

Standard Kit of Supply:
  • Basic UCI hardness tester with built-in battery
  • Probe (3N, 10N, 20N, 30N, 49N or 98N) with connection cable (Select any one)
  • USB cable
  • Charging adapter
  • Carrying case
  • BAQ certificate for UCI probes
  • USB flash drive with manuals (PDF)